language

Get Free Product Quotes

Fill in your phone and email information, and we will contact you promptly within one business day to resolve the issue you raised as soon as possible.

Home

XM-Ni1 Non Copper Coated ER80S-Ni1 Welding Wire

AWS ER80S-Ni1 is a filler metal that is often used in submerged arc welding (SAW).

Classification：

AWS: ER80S-Ni1

GB: ER55-Ni1

Shielding Gas:

80%Ar + 20%CO2

Category:

Non Copper Coated Gas-shielded Welding Wire

Email:

WhatsApp:

AWS ER80S-Ni1 Welding Wire

AWS ER80S-Ni1 is a filler metal that is often used in submerged arc welding (SAW).

It is classified as an "80" series filler metal.
The tensile strength is 580 MPa.
The "S" in the name stands for "steel,".
The "Ni1" indicates that it contains a small amount of nickel (less than 1%).

AWS ER80S-Ni1 is used to weld low-alloy steel and can be used in all welding positions. It is commonly used in the construction of pressure vessels, storage tanks, and other structures that are exposed to high levels of stress. It is also used in the petrochemical and power generation industries.

In general, the selection of a filler metal for SAW should be based on the base metal properties, the welding position, the service environment, and any code or specification requirements.

This product requires a shielding gas: 80%Ar + 20%CO2

AWS ER80s-Ni1 Welding Wire - Characteristics

The product contains 1%Ni content, it has good plasticity and toughness
It’s used to weld steel of corresponding strength level, such as ships, bridges, pressure vessels, boilers, etc.

AWS ER80S-Ni1 Welding Wire - Specifications

One chemical composition of the weld metal sample (wt%):

C	Si	Mn	P	S	Ni
0.08	0.51	0.96	0.007	0.003	0.92

One mechanical properties of the weld metal sample:

Tensild Strength MPa	Yield Strength MPa	Elongation %	Impact value
			℃	J
580	500	26	-45	125
			-60	80

The specifications of the product and welding condition (DC+):

Dia (mm) Welding Condition		1.0	1.2	1.4	1.6
Short Circuiting Transfer	Current A	80 ~ 160	100 ~ 210	-	-
Short Circuiting Transfer	Voltage V	16 ~ 22	17 ~ 22	-	-
Spray Transfer	Current A	180 ~ 280	200 ~ 300	210 ~ 320	220 ~ 330
Spray Transfer	Voltage V	24 ~ 30	24 ~ 30	24 ~ 32	24 ~ 32

AWS ER80s-Ni1 Welding Wire - Precautions

Adequately clear the oil,rust,moisture,dust and other debris of the welded parts.
When heat input is too big, it can reduce impact value , so welder should pay attention to the choice of welding current.

Non-Copper Coated Welding Wire Manufacturer

Hebei XINYU Welding Co., Ltd, mainly produces high-strength steel welding wire, Non-copper-coated solid wire, submerged arc & stainless steel welding wire. Our products are widely applied to the welding of low-alloy high tensile large & key steel structures in coal machinery, construction machinery, petrochemical machinery, pressure vessels or tanks, oil & gas pipelines, military industry, shipbuilding, bridge, and high-rise buildings, etc. At the same time, we are the only enterprise in the domestic which produces welding wire as well as welding wire equipment.

Our Welding wires and welding wire equipment are exported to the USA, Italy, Brazil, Russia, and India, etc. Welcome you to our factory any time. Please leave contact information, our professional staff will contact you the first time!

TAG:

XINYU Welding